This document was created by Phil Muir on 12th Jun 2026. 
Click here to Read this help file in a separate Window that you can alt tab to, <help=Ampero II.html.>
Note: although the Ampero II detailed.HSC help documentation does open in a separate Window, it doesn't contain links on the various buttons as the document that your reading does.

Installation Instructions

place the Ampero II scripts into your

Jaws/enu

folder

and the folder inside the Personalized Settings folder into the:

Personalized Settings

folder on your system. Any issues then please do not hesitate to E-mail me at:
info@philmuir.com
Tip: before getting started, please download the latest firmware for the unit that you are planning to update. E.G. if you are planning to update an Ampero II Stage then you will need to download the firmware for that unit. You will find the firmware on the:
Hotone website.
Known issues

Note: extremely important. You will need to be in Global settings of the Ampero II editor in order for any of these keystrokes to work. To get to global settings, tab across until you hear Jaws say, "Global Settings". When you do, press the Enter key then, Shift tab back until you hear Jaws say, "Firmware" and press the enter key. Once there all of the HSC keystrokes will work.
To brows to, load and add the .bin file for the firmware to the file path in order to update the firmware, press the keystroke <Alt+Shift+B>
To trigger the update firmware button that will start the update process, press the keystroke <Alt+Shift+U>
Note: Left clicking this button will cause the update process to start. It will take a few Minutes and the unit will reboot twice. You should be able to see a status bar on screen when updating the firmware. Once complete your Ampero 2 Stage will reboot and you will have audio from the unit. If there is any firmware failure when updating then you can turn the unit off then hold footswitches 6 and 7 on the Ampero Stage. Then carry out the above-mentioned steps again.